Comments for Nick's Car Blog

Comment on The Ultimate Plasti-Dip Guide – Tips, Ideas & More for Cars by Nick

Nick — Sat, 12 May 2012 19:34:44 +0000

Thanks! Standard finishes are matte, although if you put it on really thick it can look semi-glossy. If you want the gloss finish, you can buy the “glossifier” add-in to leave it with a gloss finish.

Comment on The Ultimate Plasti-Dip Guide – Tips, Ideas & More for Cars by Fernando

Fernando — Sat, 12 May 2012 18:46:59 +0000

Hey Nick,
I’ve been searching a lot and am a bit curious, if I plasti dip my car red for example, will the finish be matte or glossy? Or is the matte finish only with black?
Great post btw

Comment on About Me by Scott

Scott — Wed, 09 May 2012 06:32:15 +0000

thanks for the help!

Comment on About Me by Nick

Nick — Tue, 08 May 2012 11:20:21 +0000

I believe the tip size is either 2.75 or 3″, I can’t remember and have since sold the car & exhaust to a new owner. Anyone at GoodSpeed should be able to help you out there.

Comment on About Me by Scott

Scott — Tue, 08 May 2012 03:33:46 +0000

Also, do you remember the name of the person of helped in GoodSpeed?

Comment on About Me by Scott

Scott — Tue, 08 May 2012 03:28:20 +0000

Thanks Nick ! But I have last and final question. Do you happend to remember your tip size?

Comment on About Me by Nick

Nick — Mon, 07 May 2012 02:05:10 +0000

I was lucky in that Billy Boat (B&B) is located in Phoenix, so they installed it directly. I would call either B&B or GoodSpeed Performance Lab. GoodSpeed is the shop that helped me build the exhaust and facilitated the conversation with B&B, so GoodSpeed can definitely help you. GoodSpeed reccommended B&B and after 3+ years of modding Audis I’ve gotta say GoodSpeed has always been helpful & highly recommended. You can check ‘em out at: http://www.goodspeedperformance.com/

Comment on About Me by Scott

Scott — Sun, 06 May 2012 19:50:39 +0000

Hey nick.. I have a question.. I’m planning to set a up same exhaust system that you set up for your B7 A4 FWD Auto tran. Do you happend to know the part # for your S4 quadtip? and how did you put it together with BB? shop did it for you ? cost?

Comment on The Ultimate Plasti-Dip Guide – Tips, Ideas & More for Cars by Nick

Nick — Thu, 03 May 2012 18:48:55 +0000

I’m not sure, I would contact DipYourCar.com as I know they can provide some custom colors and finishes. I know that is not a color/finish that is readily available at a local hardware store (they normally stock black, white and maybe red).

Comment on B7 Audi A4, S4 and RS4 LED Daytime Running Lights (DRL) by hsa

hsa — Thu, 03 May 2012 00:04:07 +0000

I’ve been thinking about switching out my headlights on my Audi and this seems pretty simple enough to do.